Full Text:   <7019>

Summary:  <5740>

CLC number: TH311

On-line Access: 2020-02-18

Received: 2019-11-29

Revision Accepted: 2019-12-28

Crosschecked: 2020-01-07

Cited: 0

Clicked: 31343

Citations:  Bibtex RefMan EndNote GB/T7714

 ORCID:

Zhe-ming Tong

https://orcid.org/0000-0003-1129-7439

-   Go to

Article info.
Open peer comments

Journal of Zhejiang University SCIENCE A 2020 Vol.21 No.2 P.85-117

http://doi.org/10.1631/jzus.A1900608


Internal flow structure, fault detection, and performance optimization of centrifugal pumps


Author(s):  Zhe-ming Tong, Jia-ge Xin, Shui-guang Tong, Zhong-qin Yang, Jian-yun Zhao, Jun-hua Mao

Affiliation(s):  State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China; more

Corresponding email(s):   cetongsg@zju.edu.cn

Key Words:  Centrifugal pump, Two-phase flow, Cavitation, Pressure pulsation, Multi-objective optimization


Share this article to: More |Next Article >>>

Zhe-ming Tong, Jia-ge Xin, Shui-guang Tong, Zhong-qin Yang, Jian-yun Zhao, Jun-hua Mao. Internal flow structure, fault detection, and performance optimization of centrifugal pumps[J]. Journal of Zhejiang University Science A, 2020, 21(2): 85-117.

@article{title="Internal flow structure, fault detection, and performance optimization of centrifugal pumps",
author="Zhe-ming Tong, Jia-ge Xin, Shui-guang Tong, Zhong-qin Yang, Jian-yun Zhao, Jun-hua Mao",
journal="Journal of Zhejiang University Science A",
volume="21",
number="2",
pages="85-117",
year="2020",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A1900608"
}

%0 Journal Article
%T Internal flow structure, fault detection, and performance optimization of centrifugal pumps
%A Zhe-ming Tong
%A Jia-ge Xin
%A Shui-guang Tong
%A Zhong-qin Yang
%A Jian-yun Zhao
%A Jun-hua Mao
%J Journal of Zhejiang University SCIENCE A
%V 21
%N 2
%P 85-117
%@ 1673-565X
%D 2020
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A1900608

TY - JOUR
T1 - Internal flow structure, fault detection, and performance optimization of centrifugal pumps
A1 - Zhe-ming Tong
A1 - Jia-ge Xin
A1 - Shui-guang Tong
A1 - Zhong-qin Yang
A1 - Jian-yun Zhao
A1 - Jun-hua Mao
J0 - Journal of Zhejiang University Science A
VL - 21
IS - 2
SP - 85
EP - 117
%@ 1673-565X
Y1 - 2020
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A1900608


Abstract: 
This review mainly summarizes the latest developments in the internal flow field and external characteristics of centrifugal pumps. In particular, the latest findings of centrifugal pumps focused on turbulence and cavitation models, flow visualization methods, and fault detection based on noise and vibration. The external characteristics, cavitation, and vibration of the centrifugal pump were extensively discussed. In addition, advanced multi-objective optimization methods for improving impeller’s efficiency and reducing net positive suction head (NPSH) were briefed. Although some progress was made in this field, there remain many unsolved problems, such as monitoring and modeling of cavitation, rotational stall phenomenon, and discrepancies between simulation and measurement. In the future, researchers are encouraged to employ multi-dimensional flow visualization technologies and high-performance computing facilities to advance existing understandings on these issues and create new research directions.

Centrifugal pumps are important mechanical equipment for energy conversion and fluid transportation. They are widely used in agricultural water conservancy construction, petrochemical industry, electric power industry, and etc. This paper is well written in general and discusses the latest developments in the internal flow field, performance optimization and fault detection. It is a topic of great importance.

离心泵内部流动结构、性能优化与故障检测综述

目的:对离心泵的内部流动机理和外部特性、振动监测和性能优化进行研究,并对新兴研究趋势进行评述,为提高离心泵系统的能效提供参考建议.
创新点:1. 探讨了最新的用于离心泵数值模拟的湍流模型和空化模型的研究成果以及利用可视化方法揭示离心泵内部复杂流动现象的最新进展. 2. 对离心泵的外部特性、空化和振动进行了广泛的讨论,并总结出一种提高离心泵在工程应用中的效率和扬程、降低汽蚀余量的适用性强的离心泵叶轮多目标优化方法.
方法:1. 对离心泵的内部流动机理进行综述,以充分了解离心泵内部复杂的流场结构和能量损失机理. 2. 对离心泵外部特性进行研究,解释内部非定常流动与外部特性的耦合关系. 3. 介绍与离心泵在运行过程中压力脉动的监测和测量相关的最新研究进展. 4. 详细介绍优化离心泵性能的各种方法和措施.
结论:1. 尽管对离心泵内部流动现象机理及流场结构的研究已经取得了一定进展,但研究中仍存在一些亟待解决的问题,如初生空化的监测与预防、泵内旋转失速现象发生发展的规律、数值模拟和实验之间不可忽视的数据差异等. 2. 针对这些问题,开发高精度的计算流体动力学仿真模型,结合关键过流部件的优化设计来减少流动不稳定性和提高性能,以及运用现代流动显示技术的最新设备进行大量的仔细繁杂的试验与测量工作,是非常必要和重要的,也是未来泵内流动研究的趋势.

关键词:离心泵; 气液两相流; 空化机理; 压力脉动; 多目标优化

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference

[1]Alemi H, Nourbakhsh SA, Raisee M, et al., 2015. Effects of volute curvature on performance of a low specific-speed centrifugal pump at design and off-design conditions. Journal of Turbomachinery, 137(4):041009.

[2]Al-Obaidi AR, 2019. Investigation of effect of pump rotational speed on performance and detection of cavitation within a centrifugal pump using vibration analysis. Heliyon, 5(6):e01910.

[3]Al Tobi MAS, Bevan G, Ramachandran KP, et al., 2017. Experimental set-up for investigation of fault diagnosis of a centrifugal pump. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 11(3):481-485.

[4]Ayad AF, Abdalla HM, Aly AAEA, 2015. Effect of semi-open impeller side clearance on the centrifugal pump performance using CFD. Aerospace Science and Technology, 47:247-255.

[5]Bachert R, Stoffel B, Dular M, 2010. Unsteady cavitation at the tongue of the volute of a centrifugal pump. Journal of Fluids Engineering, 132(6):061301.

[6]Barrio R, Parrondo J, Blanco E, 2010. Numerical analysis of the unsteady flow in the near-tongue region in a volute-type centrifugal pump for different operating points. Computers & Fluids, 39(5):859-870.

[7]Barrio R, Fernández J, Blanco E, et al., 2011. Estimation of radial load in centrifugal pumps using computational fluid dynamics. European Journal of Mechanics-B/ Fluids, 30(3):316-324.

[8]Barrios L, Prado MG, 2011. Experimental visualization of two-phase flow inside an electrical submersible pump stage. Journal of Energy Resources Technology, 133(4):042901.

[9]Bellary SAI, Adhav R, Siddique MH, et al., 2016. Application of computational fluid dynamics and surrogate-coupled evolutionary computing to enhance centrifugal-pump performance. Engineering Applications of Computational Fluid Mechanics, 10(1):171-181.

[10]Benaouicha M, Astolfi JA, Ducoin A, et al., 2010. A numerical study of cavitation induced vibration. Proceedings of ASME Pressure Vessels and Piping Division/K-PVP Conference, p.35-42.

[11]Benim AC, Pasqualotto E, Suh SH, 2008. Modelling turbulent flow past a circular cylinder by RANS, URANS, LES and DES. Progress in Computational Fluid Dynamics, An International Journal (PCFD), 8(5):299-307.

[12]Bensow RE, Bark G, 2010. Implicit LES predictions of the cavitating flow on a propeller. Journal of Fluids Engineering, 132(4):041302.

[13]Benturki M, Dizene R, Ghenaiet A, 2018. Multi-objective optimization of two-stage centrifugal pump using NSGA-II algorithm. Journal of Applied Fluid Mechanics, 11(4):929-942.

[14]Bilus I, Predin A, 2009. Numerical and experimental approach to cavitation surge obstruction in water pump. International Journal of Numerical Methods for Heat & Fluid Flow, 19(7):818-834.

[15]Bonaiuti D, Zangeneh M, 2009. On the coupling of inverse design and optimization techniques for the multiobjective, multipoint design of turbomachinery blades. Journal of Turbomachinery, 131(2):021014.

[16]Bordoloi DJ, Tiwari R, 2017. Identification of suction flow blockages and casing cavitations in centrifugal pumps by optimal support vector machine techniques. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(8):2957-2968.

[17]Bowade A, Parashar C, 2015. A review of different blade design methods for radial flow centrifugal pump. International Journal of Scientific Engineering and Research, 3(7):24-27.

[18]Brennen EC, 2005. Fundamentals of Multiphase Flow. Cambridge University Press, New York, USA.

[19]Byskov RK, Jacobsen CB, Pedersen N, 2003. Flow in a centrifugal pump impeller at design and off-design conditions– part II: large eddy simulations. Journal of Fluids Engineering, 125(1):73-83.

[20]Caridad J, Asuaje M, Kenyery F, et al., 2008. Characterization of a centrifugal pump impeller under two-phase flow conditions. Journal of Petroleum Science and Engineering, 63(1-4):18-22.

[21]Cavazzini G, Pavesi G, Ardizzon G, 2011. Pressure instabilities in a vaned centrifugal pump. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225(7):930-939.

[22]Cavazzini G, Pavesi G, Santolin A, et al., 2015. Using splitter blades to improve suction performance of centrifugal impeller pumps. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229(3):309-323.

[23]Černetič J, 2009. The use of noise and vibration signals for detecting cavitation in kinetic pumps. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223(7):1645-1655.

[24]Chalghoum I, Elaoud S, Akrout M, et al., 2016. Transient behavior of a centrifugal pump during starting period. Applied Acoustics, 109:82-89.

[25]Chalghoum I, Elaoud S, Kanfoudi H, et al., 2018. The effects of the rotor-stator interaction on unsteady pressure pulsation and radial force in a centrifugal pump. Journal of Hydrodynamics, 30(4):672-681.

[26]Chang H, Shi WD, Li W, et al., 2020. Experimental optimization of jet self-priming centrifugal pump based on orthogonal design and grey-correlational method. Journal of Thermal Science, 29:241-250.

[27]Chen HX, Ma Z, Zhang W, et al., 2017a. On the hydrodynamics of hydraulic machinery and flow control. Journal of Hydrodynamics, 29(5):782-789.

[28]Chen HX, He JW, Liu C, 2017b. Design and experiment of the centrifugal pump impellers with twisted inlet vice blades. Journal of Hydrodynamics, 29(6):1085-1088.

[29]Cheng ZW, Tong SG, Tong ZM, 2019. Bi-directional nozzle control of multistage radial-inflow turbine for optimal part-load operation of compressed air energy storage. Energy Conversion and Management, 181:485-500.

[30]Choi JS, McLaughlin DK, Thompson DE, 2003. Experiments on the unsteady flow field and noise generation in a centrifugal pump impeller. Journal of Sound and Vibration, 263(3):493-514.

[31]Chudina M, 2003. Noise as an indicator of cavitation in a centrifugal pump. Acoustical Physics, 49(4):463-474.

[32]Čudina M, Prezelj J, 2009. Detection of cavitation in operation of kinetic pumps. Use of discrete frequency tone in audible spectra. Applied Acoustics, 70(4):540-546.

[33]Deb K, Jain H, 2014. An evolutionary many-objective optimization algorithm using reference-point-based nondominated sorting approach, part I: solving problems with box constraints. IEEE Transactions on Evolutionary Computation, 18(4):577-601.

[34]de Giorgi MG, Ficarella A, Lay-Ekuakille A, 2015. Monitoring cavitation regime from pressure and optical sensors: comparing methods using wavelet decomposition for signal processing. IEEE Sensors Journal, 15(8):4684-4691.

[35]Derakhshan S, Bashiri M, 2018. Investigation of an efficient shape optimization procedure for centrifugal pump impeller using eagle strategy algorithm and ANN (case study: slurry flow). Structural and Multidisciplinary Optimization, 58(2):459-473.

[36]Derakhshan S, Pourmahdavi M, Abdolahnejad E, et al., 2013. Numerical shape optimization of a centrifugal pump impeller using artificial bee colony algorithm. Computers & Fluids, 81:145-151.

[37]Ding H, Visser FC, Jiang Y, et al., 2011. Demonstration and validation of a 3D CFD simulation tool predicting pump performance and cavitation for industrial applications. Journal of Fluids Engineering, 133(1):011101.

[38]Dong L, Zhao YQ, Dai C, 2019. Detection of inception cavitation in centrifugal pump by fluid-borne noise diagnostic. Shock and Vibration, 2019:9641478.

[39]Dou HS, Jiang W, 2013. Application of energy gradient theory in flow instability in a centrifugal pump. IOP Conference Series: Materials Science and Engineering, 52(1):012007.

[40]Fang HB, Wang Q, Tu YC, et al., 2008. An efficient non-dominated sorting method for evolutionary algorithms. Evolutionary Computation, 16(3):355-384.

[41]Farokhzad S, Bakhtyari N, Ahmadi H, 2013. Vibration signals analysis and condition monitoring of centrifugal pump. Technical Journal of Engineering and Applied Sciences, 3(12):1081-1085.

[42]Feng J, Benra FK, Dohmen HJ, 2007. Qualitative comparison between numerical and experimental results of unsteady flow in a radial diffuser pump. Journal of Visualization, 10(4):349-357.

[43]Feng J, Benra FK, Dohmen HJ, 2009. Unsteady flow visualization at part-load conditions of a radial diffuser pump: by PIV and CFD. Journal of Visualization, 12(1):65-72.

[44]Feng J, Benra FK, Dohmen HJ, 2011. Investigation of periodically unsteady flow in a radial pump by CFD simulations and LDV measurements. Journal of Turbomachinery, 133(1):011004.

[45]Fu YX, Yuan JP, Yuan SQ, et al., 2015. Numerical and experimental analysis of flow phenomena in a centrifugal pump operating under low flow rates. Journal of Fluids Engineering, 137(1):011102.

[46]Gaetani P, Boccazzi A, Sala R, 2012. Low field in the vaned diffuser of a centrifugal pump at different vane setting angles. Journal of Fluids Engineering, 134(3):031101.

[47]Gao B, Zhang N, Li Z, et al., 2016. Influence of the blade trailing edge profile on the performance and unsteady pressure pulsations in a low specific speed centrifugal pump. Journal of Fluids Engineering, 138(5):051106.

[48]Gao B, Guo PM, Zhang N, et al., 2017. Experimental investigation on cavitating flow induced vibration characteristics of a low specific speed centrifugal pump. Shock and Vibration, 2017:6568930.

[49]Goel T, Dorney DJ, Haftka RT, et al., 2008. Improving the hydrodynamic performance of diffuser vanes via shape optimization. Computers & Fluids, 37(6):705-723.

[50]Golbabaei Asl M, Torabi R, Nourbakhsh SA, 2009. Experimental and FEM failure analysis and optimization of a centrifugal-pump volute casing. Engineering Failure Analysis, 16(6):1996-2003.

[51]Goyal D, Pabla BS, 2016. The vibration monitoring methods and signal processing techniques for structural health monitoring: a review. Archives of Computational Methods in Engineering, 23(4):585-594.

[52]Guleren KM, 2018. Automatic optimization of a centrifugal pump based on impeller-diffuser interaction. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 232(8):1004-1018.

[53]Guleren KM, Pinarbasi A, 2004. Numerical simulation of the stalled flow within a vaned centrifugal pump. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218(4):425-435.

[54]Guo R, Li RN, Zhang RH, 2019. Reconstruction and prediction of flow field fluctuation intensity and flow-induced noise in impeller domain of jet centrifugal pump using gappy pod method. Energies, 12(1):111.

[55]Guo XM, Zhu ZC, Cui BL, et al., 2016. Effects of the number of inducer blades on the anti-cavitation characteristics and external performance of a centrifugal pump. Journal of Mechanical Science and Technology, 30(7):3173-3181.

[56]Heo MW, Ma SB, Shim HS, et al., 2016. High-efficiency design optimization of a centrifugal pump. Journal of Mechanical Science and Technology, 30(9):3917-3927.

[57]Hergt PH, 1999. Pump research and development: past, present, and future. Journal of Fluids Engineering, 121(2):248-253.

[58]Hirschi R, Dupont P, Avellan F, et al., 1998. Centrifugal pump performance drop due to leading edge cavitation: numerical predictions compared with model tests. Journal of Fluids Engineering, 120(4):705-711.

[59]Hu JK, Tong ZM, Xin JG, et al., 2019. Correspondence: simulation and experiment of a remotely operated underwater vehicle with cavitation jet technology. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 20(10):804-810.

[60]Huang RF, Luo XW, Ji B, et al., 2015. Multi-objective optimization of a mixed-flow pump impeller using modified NSGA-II algorithm. Science China Technological Sciences, 58(12):2122-2130.

[61]Huang YL, 2019. Research on Flow Field and Pressure Pulsation Characteristics of Centrifugal Pump Based on Laser Diagnosis Technology. MS Thesis, Harbin Engineering University, Harbin, China (in Chinese).

[62]Jafarzadeh B, Hajari A, Alishahi MM, et al., 2011. The flow simulation of a low-specific-speed high-speed centrifugal pump. Applied Mathematical Modelling, 35(1):242-249.

[63]Jiang QF, Heng YG, Liu XB, et al., 2019. A review of design considerations of centrifugal pump capability for handling inlet gas-liquid two-phase flows. Energies, 12(6):1078.

[64]Jiang W, 2015. Study on Mechanism of Flow Instability and Improvement of Centrifugal Pump. MS Thesis, Zhejiang Sci-Tech University, Hangzhou, China (in Chinese).

[65]Jin R, Chen W, Simpson TW, 2001. Comparative studies of metamodelling techniques under multiple modelling criteria. Structural and Multidisciplinary Optimization, 23(1):1-13.

[66]Kadambi JR, Charoenngam P, Subramanian A, et al., 2004. Investigations of particle velocities in a slurry pump using PIV: part 1, the tongue and adjacent channel flow. Journal of Energy Resources Technology, 126(4):271-278.

[67]Kaewnai S, Chamaoot M, Wongwises S, 2009. Predicting performance of radial flow type impeller of centrifugal pump using CFD. Journal of Mechanical Science and Technology, 23(6):1620-1627.

[68]Keller J, Blanco E, Barrio R, et al., 2014. PIV measurements of the unsteady flow structures in a volute centrifugal pump at a high flow rate. Experiments in Fluids, 55(10):1820.

[69]Kim JH, Oh KT, Pyun KB, et al., 2013. Design optimization of a centrifugal pump impeller and volute using computational fluid dynamics. IOP Conference Series: Earth and Environmental Science, 15:032025.

[70]Kim JH, Lee HC, Kim JH, et al., 2015. Design techniques to improve the performance of a centrifugal pump using CFD. Journal of Mechanical Science and Technology, 29(1):215-225.

[71]Li WG, 2008. Numerical study on behavior of a centrifugal pump when delivering viscous oils–part 2: internal flow. International Journal of Turbo & Jet-Engines, 25(2):81-94.

[72]Li XJ, Yuan SQ, Pan ZY, et al., 2013. Numerical simulation of leading edge cavitation within the whole flow passage of a centrifugal pump. Science China Technological Sciences, 56(9):2156-2162.

[73]Li XJ, Gao PL, Zhu ZC, et al., 2018. Effect of the blade loading distribution on hydrodynamic performance of a centrifugal pump with cylindrical blades. Journal of Mechanical Science and Technology, 32(3):1161-1170.

[74]Li Y, Feng GQ, Li XJ, et al., 2018. An experimental study on the cavitation vibration characteristics of a centrifugal pump at normal flow rate. Journal of Mechanical Science and Technology, 32(10):4711-4720.

[75]Li ZF, Wu DZ, Wang LQ, et al., 2010. Numerical simulation of the transient flow in a centrifugal pump during starting period. Journal of Fluids Engineering, 132(8):081102.

[76]Li ZF, Wu P, Wu DZ, et al., 2011. Experimental and numerical study of transient flow in a centrifugal pump during startup. Journal of Mechanical Science and Technology, 25(3):749-757.

[77]Lin Z, Xue W, 2018. Safety integrity level evaluation of nuclear centrifugal pump based on performance degradation data. Advances in Mechanical Engineering, 10(4):1-13.

[78]Liu DM, Liu SH, Wu YL, et al., 2009. LES numerical simulation of cavitation bubble shedding on ALE 25 and ALE 15 hydrofoils. Journal of Hydrodynamics, 21(6):807-813.

[79]Liu HL, Wang Y, Yuan SQ, et al., 2010. Effects of blade number on characteristics of centrifugal pumps. Chinese Journal of Mechanical Engineering, 23(6):742-747.

[80]Liu HL, Wang Y, Liu DX, et al., 2013a. Assessment of a turbulence model for numerical predictions of sheet-cavitating flows in centrifugal pumps? Journal of Mechanical Science and Technology, 27(9):2743-2750.

[81]Liu HL, Liu DX, Wang Y, et al., 2013b. Experimental investigation and numerical analysis of unsteady attached sheetcavitating flows in a centrifugal pump. Journal of Hydrodynamics, 25(3):370-378.

[82]Liu HL, Wang K, Kim HB, et al., 2013c. Experimental investigation of the unsteady flow in a double-blade centrifugal pump impeller. Science China Technological Sciences, 56(4):812-817.

[83]Liu M, Tan L, Cao SL, 2018. Design method of controllable blade angle and orthogonal optimization of pressure rise for a multiphase pump. Energies, 11(5):1048.

[84]Liu XM, Zhang WB, 2010. Two schemes of multi-objective aerodynamic optimization for centrifugal impeller using response surface model and genetic algorithm. Proceedings of ASME Turbo Expo 2010: Power for Land, Sea, and Air, p.1041-1053.

[85]Liu XW, Li HC, Shi XX, et al., 2019. Application of biharmonic equation in impeller profile optimization design of an aero-centrifugal pump. Engineering Computations, 36(5):1764-1795.

[86]Lu JX, Yuan SQ, Siva P, et al., 2017a. The characteristics investigation under the unsteady cavitation condition in a centrifugal pump. Journal of Mechanical Science and Technology, 31(3):1213-1222.

[87]Lu JX, Yuan SQ, Parameswaran S, et al., 2017b. Investigation on the vibration and flow instabilities induced by cavitation in a centrifugal pump. Advances in Mechanical Engineering, 9(4):1-11.

[88]Lu JX, Liu XB, Zeng YZ, et al., 2019. Detection of the flow state for a centrifugal pump based on vibration. Energies, 12(16):3066.

[89]Lu NX, Bensow RE, Bark G, 2010. LES of unsteady cavitation on the delft twisted foil. Journal of Hydrodynamics, 22(S1):742-749.

[90]Luo KK, Wang Y, Liu HL, et al., 2019. Effect of suction chamber baffles on pressure fluctuations in a low specific speed centrifugal pump. Journal of Vibroengineering, 21(5):1441-1455.

[91]Luo Y, Sun H, Yuan SQ, et al., 2015. Research on statistical characteristics of vibration in centrifugal pump. Technical Journal of the Faculty of Engineering, 38(1):49-61.

[92]Mandhare NA, Karunamurthy K, Ismail S, 2019. Compendious review on “internal flow physics and minimization of flow instabilities through design modifications in a centrifugal pump”. Journal of Pressure Vessel Technology, 141(5):051601.

[93]Mansour M, Wunderlich B, Thévenin D, 2018. Effect of tip clearance gap and inducer on the transport of two-phase air-water flows by centrifugal pumps. Experimental Thermal and Fluid Science, 99:487-509.

[94]Medvitz RB, Kunz RF, Boger DA, et al., 2002. Performance analysis of cavitating flow in centrifugal pumps using multiphase CFD. Journal of Fluids Engineering, 124(2):377-383.

[95]Meng L, He M, Zhou LJ, et al., 2016. Influence of impeller-tongue interaction on the unsteady cavitation behavior in a centrifugal pump. Engineering Computations, 33(1):171-183.

[96]Miner SM, Beaudoin RJ, Flack RD, 1989. Laser velocimeter measurements in a centrifugal flow pump. Journal of Turbomachinery, 111(3):205-212.

[97]Monte Verde W, Biazussi JL, Sassim NA, et al., 2017. Experimental study of gas-liquid two-phase flow patterns within centrifugal pumps impellers. Experimental Thermal and Fluid Science, 85:37-51.

[98]Mousmoulis G, Karlsen-Davies N, Aggidis G, et al., 2019. Experimental analysis of cavitation in a centrifugal pump using acoustic emission, vibration measurements and flow visualization. European Journal of Mechanics–B/ Fluids, 75:300-311.

[99]Mouvanal S, Chatterjee D, Bakshi S, et al., 2018. Numerical prediction of potential cavitation erosion in fuel injectors. International Journal of Multiphase Flow, 104:113-124.

[100]Murakami M, Minemura K, 1974a. Effects of entrained air on the performance of a centrifugal pump: 1st report, performance and flow conditions. Bulletin of JSME, 17(110):1047-1055.

[101]Murakami M, Minemura K, 1974b. Effects of entrained air on the performance of centrifugal pumps: 2nd report, effects of number of blades. Bulletin of JSME, 17(112):1286-1295.

[102]Nataraj M, Arunachalam VP, 2006. Optimizing impeller geometry for performance enhancement of a centrifugal pump using the Taguchi quality concept. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 220(7):765-782.

[103]Nourbakhsh A, Safikhani H, Derakhshan S, 2011. The comparison of multi-objective particle swarm optimization and NSGA II algorithm: applications in centrifugal pumps. Engineering Optimization, 43(10):1095-1113.

[104]Panda AK, Rapur JS, Tiwari R, 2018. Prediction of flow blockages and impending cavitation in centrifugal pumps using support vector machine (SVM) algorithms based on vibration measurements. Measurement, 130:44-56.

[105]Parrondo-Gayo JL, Ǵonzaľez-Peŕez J, Fernańdez-Francos J, 2002. The effect of the operating point on the pressure fluctuations at the blade passage frequency in the volute of a centrifugal pump. Journal of Fluids Engineering, 124(3):784-790.

[106]Pavesi G, Cavazzini G, Ardizzon G, 2008. Time-frequency characterization of the unsteady phenomena in a centrifugal pump. International Journal of Heat and Fluid Flow, 29(5):1527-1540.

[107]Pedersen N, Larsen PS, Jacobsen CB, 2003. Flow in a centrifugal pump impeller at design and off-design conditions —part I: particle image velocimetry (PIV) and laser Doppler velocimetry (LDV) measurements. Journal of Fluids Engineering, 125(1):61-72.

[108]Pei J, Yuan SQ, Yuan JP, 2013. Numerical analysis of periodic flow unsteadiness in a single-blade centrifugal pump. Science China Technological Sciences, 56(1):212-221.

[109]Pei J, Wang WJ, Yuan SQ, 2016a. Multi-point optimization on meridional shape of a centrifugal pump impeller for performance improvement. Journal of Mechanical Science and Technology, 30(11):4949-4960.

[110]Pei J, Wang WJ, Yuan SQ, et al., 2016b. Optimization on the impeller of a low-specific-speed centrifugal pump for hydraulic performance improvement. Chinese Journal of Mechanical Engineering, 29(5):992-1002.

[111]Pei J, Gan XC, Wang WJ, et al., 2019. Multi-objective shape optimization on the inlet pipe of a vertical inline pump. Journal of Fluids Engineering, 141(6):061108.

[112]Posa A, Lippolis A, Verzicco R, et al., 2011. Large-eddy simulations in mixed-flow pumps using an immersed-boundary method. Computers & Fluids, 47(1):33-43.

[113]Poullikkas A, 2003. Effects of two-phase liquid-gas flow on the performance of nuclear reactor cooling pumps. Progress in Nuclear Energy, 42(1):3-10.

[114]Rapur JS, Tiwari R, 2018. Automation of multi-fault diagnosing of centrifugal pumps using multi-class support vector machine with vibration and motor current signals in frequency domain. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(6):278.

[115]Safikhani H, Khalkhali A, Farajpoor M, 2011. Pareto based multi-objective optimization of centrifugal pumps using CFD, neural networks and genetic algorithms. Engineering Applications of Computational Fluid Mechanics, 5(1):37-48.

[116]Sakthivel NR, Sugumaran V, Nair BB, 2010a. Comparison of decision tree-fuzzy and rough set-fuzzy methods for fault categorization of mono-block centrifugal pump. Mechanical Systems and Signal Processing, 24(6):1887-1906.

[117]Sakthivel NR, Sugumaran V, Babudevasenapati S, 2010b. Vibration based fault diagnosis of monoblock centrifugal pump using decision tree. Expert Systems with Applications, 37(6):4040-4049.

[118]Sato S, Furukawa A, Takamatsu Y, 1996. Air-water two-phase flow performance of centrifugal pump impellers with various blade angles. JSME International Journal Series B Fluids and Thermal Engineering, 39(2):223-229.

[119]Schäfer T, Bieberle A, Neumann M, et al., 2015. Application of gamma-ray computed tomography for the analysis of gas holdup distributions in centrifugal pumps. Flow Measurement and Instrumentation, 46:262-267.

[120]Scott SL, 2003. Multiphase pumping addresses a wide range of operating problems. Oil & Gas Journal, 101(37):59.

[121]Sekoguchi K, Takada S, Kanemori Y, 1984. Study of air-water two-phase centrifugal pump by means of electric resistivity probe technique for void fraction measurement: 1st report, measurement of void fraction distribution in a radial flow impeller. Bulletin of JSME, 27(227):931-938.

[122]Shah SR, Jain SV, Patel RN, et al., 2013. CFD for centrifugal pumps: a review of the state-of-the-art. Procedia Engineering, 51:715-720.

[123]Shao CL, Zhou JF, Cheng WJ, 2015. Experimental and numerical study of external performance and internal flow of a molten salt pump that transports fluids with different viscosities. International Journal of Heat and Mass Transfer, 89:627-640.

[124]Shao CL, Li CQ, Zhou JF, 2018. Experimental investigation of flow patterns and external performance of a centrifugal pump that transports gas-liquid two-phase mixtures. International Journal of Heat and Fluid Flow, 71:460-469.

[125]Shi WD, Zhou L, Lu WG, et al., 2013. Numerical prediction and performance experiment in a deep-well centrifugal pump with different impeller outlet width. Chinese Journal of Mechanical Engineering, 26(1):46-52.

[126]Shi WD, Wang C, Wang W, et al., 2014. Numerical calculation on cavitation pressure pulsation in centrifugal pump. Advances in Mechanical Engineering, 2014:367631.

[127]Shim HS, Afzal A, Kim KY, et al., 2016. Three-objective optimization of a centrifugal pump with double volute to minimize radial thrust at off-design conditions. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 230(6):598-615.

[128]Shim HS, Kim KY, Choi YS, 2018. Three-objective optimization of a centrifugal pump to reduce flow recirculation and cavitation. Journal of Fluids Engineering, 140(9):091202.

[129]Shojaeefard MH, Tahani M, Ehghaghi MB, et al., 2012. Corrigendum to “Numerical study of the effects of some geometric characteristics of a centrifugal pump impeller that pumps a viscous fluid” [Computers & Fluids 60 (2012) 61–70). Computers & Fluids, 64:157.

[130]Si QR, Yuan SQ, Yuan JP, et al., 2013. Multiobjective optimization of low-specific-speed multistage pumps by using matrix analysis and CFD method. Journal of Applied Mathematics, 2013:136195.

[131]Si QR, Dupont P, Bayeul-Lainé AC, et al., 2015. An experimental study of the flow field inside the diffuser passage of a laboratory centrifugal pump. Journal of Fluids Engineering, 137(6):061105.

[132]Si QR, Ali A, Yuan JP, et al., 2019. Flow-induced noises in a centrifugal pump: a review. Science of Advanced Materials, 11(7):909-924.

[133]Siddique MH, Afzal A, Samad A, 2018. Design optimization of the centrifugal pumps via low fidelity models. Mathematical Problems in Engineering, 2018:3987594.

[134]Singhal AK, Athavale MM, Li HY, et al., 2002. Mathematical basis and validation of the full cavitation model. Journal of Fluids Engineering, 124(3):617-624.

[135]Song Y, Fan HG, Zhang W, et al., 2019. Flow characteristics in volute of a double-suction centrifugal pump with different impeller arrangements. Energies, 12(4):669.

[136]Stel H, Amaral GDL, Negrão COR, et al., 2013. Numerical analysis of the fluid flow in the first stage of a two-stage centrifugal pump with a vaned diffuser. Journal of Fluids Engineering, 135(7):071104.

[137]Sun H, Yuan SQ, Luo Y, 2018. Cyclic spectral analysis of vibration signals for centrifugal pump fault characterization. IEEE Sensors Journal, 18(7):2925-2933.

[138]Tan L, Cao SL, Wang YM, et al., 2012. Numerical simulation of cavitation in a centrifugal pump at low flow rate. Chinese Physics Letters, 29(1):014702.

[139]Tan L, Zhu BS, Cao SL, et al., 2013. Cavitation flow simulation for a centrifugal pump at a low flow rate. Chinese Science Bulletin, 58(8):949-952.

[140]Tan L, Zhu BS, Cao SL, et al., 2014a. Influence of blade wrap angle on centrifugal pump performance by numerical and experimental study. Chinese Journal of Mechanical Engineering, 27(1):171-177.

[141]Tan L, Zhu BS, Cao SL, et al., 2014b. Influence of prewhirl regulation by inlet guide vanes on cavitation performance of a centrifugal pump. Energies, 7(2):1050-1065.

[142]Tan L, Zhu BS, Wang YC, et al., 2015. Numerical study on characteristics of unsteady flow in a centrifugal pump volute at partial load condition. Engineering Computations, 32(6):1549-1566.

[143]Tang XL, Bian LY, Wang FJ, et al., 2013. Numerical investigations on cavitating flows with thermodynamic effects in a diffuser-type centrifugal pump. Journal of Mechanical Science and Technology, 27(6):1655-1664.

[144]Tao R, Xiao RF, Wang ZW, 2018a. Influence of blade leading-edge shape on cavitation in a centrifugal pump impeller. Energies, 11(10):2588.

[145]Tao R, Xiao RF, Zhu D, et al., 2018b. Multi-objective optimization of double suction centrifugal pump. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(6):1108-1117.

[146]Tong SG, Cheng ZW, Cong FY, et al., 2018. Developing a grid-connected power optimization strategy for the integration of wind power with low-temperature adiabatic compressed air energy storage. Renewable Energy, 125: 73-86.

[147]Tong SG, Zhao H, Liu HQ, et al., 2019. Optimization calculation method for efficiency of multistage split case centrifugal pump. Journal of Zhejiang University (Engineering Science), 53(5):988-996 (in Chinese).

[148]Tong ZM, Li Y, Westerdahl D, et al., 2019a. Exploring the effects of ventilation practices in mitigating in-vehicle exposure to traffic-related air pollutants in China. Environment International, 127:773-784.

[149]Tong ZM, Chen Y, Tong SG, et al., 2019b. Multi-objective optimization design of low specific speed centrifugal pump based on NSGA-III algorithm. China Mechanical Engineering, in press (in Chinese).

[150]Tong ZM, Cheng ZW, Tong SG, 2019c. Preliminary design of multistage radial turbines based on rotor loss characteristics under variable operating conditions. Energies, 12(13):2550.

[151]van den Braembussche RA, 2008. Numerical optimization for advanced turbomachinery design. In: Thévenin D, Janiga G (Eds.), Optimization and Computational Fluid Dynamics. Springer, Berlin, Germany, p.147-189.

[152]Wang C, Shi WD, Wang XK, et al., 2017. Optimal design of multistage centrifugal pump based on the combined energy loss model and computational fluid dynamics. Applied Energy, 187:10-26.

[153]Wang GY, Senocak I, Shyy W, et al., 2001. Dynamics of attached turbulent cavitating flows. Progress in Aerospace Sciences, 37(6):551-581.

[154]Wang J, Wang Y, Liu HL, et al., 2015. An improved turbulence model for predicting unsteady cavitating flows in centrifugal pump. International Journal of Numerical Methods for Heat & Fluid Flow, 25(5):1198-1213.

[155]Wang K, Liu HL, Zhou XH, et al., 2016. Experimental research on pressure fluctuation and vibration in a mixed flow pump. Journal of Mechanical Science and Technology, 30(1):179-184.

[156]Wang K, Lu X, He XH, 2018. Experimental investigation of vibration characteristics in a centrifugal pump with vaned diffuser. Shock and Vibration, 2018:9486536.

[157]Wang W, 2016. Research on Hydrodynamic Noise of Multistage Centrifugal Pump. MS Thesis, Jiangsu University, Nanjing, China (in Chinese).

[158]Wang WJ, Yuan SQ, Pei J, et al., 2017. Optimization of the diffuser in a centrifugal pump by combining response surface method with multi-island genetic algorithm. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(2):191-201.

[159]Wang WJ, Osman MK, Pei J, et al., 2019. Artificial neural networks approach for a multi-objective cavitation optimization design in a double-suction centrifugal pump. Processes, 7(5):246.

[160]Wang XD, Hirsch C, Kang S, et al., 2011. Multi-objective optimization of turbomachinery using improved NSGA-II and approximation model. Computer Methods in Applied Mechanics and Engineering, 200(9-12):883-895.

[161]Wang Y, Liu HL, Liu DX, et al., 2016. Application of the two-phase three-component computational model to predict cavitating flow in a centrifugal pump and its validation. Computers & Fluids, 131:142-150.

[162]Wang YQ, Huo XW, 2018. Multiobjective optimization design and performance prediction of centrifugal pump based on orthogonal test. Advances in Materials Science and Engineering, 2018:6218178.

[163]Wang YQ, Huo XW, Ji HL, 2018. Multiobjective optimization design and experimental study of desulfurization dust removal centrifugal pump based on immune particle swarm algorithm. Advances in Materials Science and Engineering, 2018:6294824.

[164]Wei L, Wang C, Shi WD, et al., 2017. Numerical calculation and optimization designs in engine cooling water pump. Journal of Mechanical Science and Technology, 31(5):2319-2329.

[165]Westra RW, Broersma L, van Andel K, et al., 2010. PIV measurements and CFD computations of secondary flow in a centrifugal pump impeller. Journal of Fluids Engineering, 132(6):061104.

[166]Wood GM, Murphy JS, Farquhar J, 1960. An experimental study of cavitation in a mixed flow pump impeller. Journal of Basic Engineering, 82(4):929-940.

[167]Wu DZ, Wu P, Li ZF, et al., 2010. The transient flow in a centrifugal pump during the discharge valve rapid opening process. Nuclear Engineering and Design, 240(12):4061-4068.

[168]Wu KH, Lin BJ, Hung CI, 2008. Novel design of centrifugal pump impellers using generated machining method and CFD. Engineering Applications of Computational Fluid Mechanics, 2(2):195-207.

[169]Wu YL, Liu SH, Yuan HJ, et al., 2011. PIV measurement on internal instantaneous flows of a centrifugal pump. Science China Technological Sciences, 54(2):270-276.

[170]Xue R, Cai YJ, Fang XF, et al., 2019. Optimization study on a novel high-speed oil-free centrifugal water pump with hydrodynamic bearings. Applied Sciences, 9(15):3050.

[171]Yang W, Xiao RF, 2014. Multiobjective optimization design of a pump–turbine impeller based on an inverse design using a combination optimization strategy. Journal of Fluids Engineering, 136(1):014501.

[172]Yang W, Xiao RF, Wang FJ, et al., 2014. Influence of splitter blades on the cavitation performance of a double suction centrifugal pump. Advances in Mechanical Engineering, 2014:963197.

[173]Yang ZJ, Wang FJ, Zhou PJ, 2012. Evaluation of subgrid-scale models in large-eddy simulations of turbulent flow in a centrifugal pump impeller. Chinese Journal of Mechanical Engineering, 25(5):911-918.

[174]Yao ZF, Wang FJ, Qu LX, et al., 2011. Experimental investigation of time-frequency characteristics of pressure fluctuations in a double-suction centrifugal pump. Journal of Fluids Engineering, 133(10):101303.

[175]Yoshida Y, Eguchi M, Motomura T, et al., 2010. Rotordynamic forces acting on three-bladed inducer under supersynchronous/synchronous rotating cavitation. Journal of Fluids Engineering, 132(6):061105.

[176]Zargar OA, 2014. Detecting cavitation in a vertical sea water centrifugal lift pump related to Iran oil industry cooling water circulation system. Universal Journal of Mechanical Engineering, 2(4):125-131.

[177]Zhang JF, Appiah D, Zhang F, et al., 2019. Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine. Energy Science & Engineering, 7(4):1264-1279.

[178]Zhang JY, Zhu HW, Yang C, et al., 2011. Multi-objective shape optimization of helico-axial multiphase pump impeller based on NSGA-II and ANN. Energy Conversion and Management, 52(1):538-546.

[179]Zhang JY, Cai SJ, Li YJ, et al., 2016. Visualization study of gas-liquid two-phase flow patterns inside a three-stage rotodynamic multiphase pump. Experimental Thermal and Fluid Science, 70:125-138.

[180]Zhang N, Yang MG, Gao B, et al., 2016. Investigation of rotor-stator interaction and flow unsteadiness in a low specific speed centrifugal pump. Strojniški Vestnik– Journal of Mechanical Engineering, 62(1):21-31.

[181]Zhang N, Gao B, Li Z, et al., 2018. Unsteady flow structure and its evolution in a low specific speed centrifugal pump measured by PIV. Experimental Thermal and Fluid Science, 97:133-144.

[182]Zhang QF, Li H, 2007. MOEA/D: a multiobjective evolutionary algorithm based on decomposition. IEEE Transactions on Evolutionary Computation, 11(6):712-731.

[183]Zhang QH, Cao L, Yan ZX, et al., 2019. Hydraulics and blading of centrifugal pump impellers: a systematic review and application. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 43(1):1-12.

[184]Zhang RH, Guo R, Yang JH, et al., 2017. Inverse method of centrifugal pump impeller based on proper orthogonal decomposition (POD) method. Chinese Journal of Mechanical Engineering, 30(4):1025-1031.

[185]Zhang Y, Wu JL, Zhang YQ, et al., 2014a. Design optimization of centrifugal pump using radial basis function metamodels. Advances in Mechanical Engineering, 2014: 457542.

[186]Zhang Y, Hu SB, Wu JL, et al., 2014b. Multi-objective optimization of double suction centrifugal pump using Kriging metamodels. Advances in Engineering Software, 74:16-26.

[187]Zhang Y, Hu SB, Zhang YQ, et al., 2014c. Optimization and analysis of centrifugal pump considering fluid-structure interaction. The Scientific World Journal, 2014:131802.

[188]Zhang YL, Zhu ZC, Li WG, 2016. Experiments on transient performance of a low specific speed centrifugal pump with open impeller. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 230(7):648-659.

[189]Zhao A, Lai ZN, Wu P, et al., 2016. Multi-objective optimization of a low specific speed centrifugal pump using an evolutionary algorithm. Engineering Optimization, 48(7):1251-1274.

[190]Zhao WG, Zhao GS, 2018. Numerical investigation on the transient characteristics of sediment-laden two-phase flow in a centrifugal pump. Journal of Mechanical Science and Technology, 32(1):167-176.

[191]Zhao XR, Xiao YX, Wang ZW, et al., 2018. Unsteady flow and pressure pulsation characteristics analysis of rotating stall in centrifugal pumps under off-design conditions. Journal of Fluids Engineering, 140(2):021105.

[192]Zheng LL, Dou HS, Chen XP, et al., 2018. Pressure fluctuation generated by the interaction of blade and tongue. Journal of Thermal Science, 27(1):8-16.

[193]Zhou L, Shi WD, Lu WG, et al., 2012. Numerical investigations and performance experiments of a deep-well centrifugal pump with different diffusers. Journal of Fluids Engineering, 134(7):071102.

[194]Zhou L, Shi WD, Wu SQ, 2013. Performance optimization in a centrifugal pump impeller by orthogonal experiment and numerical simulation. Advances in Mechanical Engineering, 2013:385809.

[195]Zhou L, Shi WD, Cao WD, et al., 2015. CFD investigation and PIV validation of flow field in a compact return diffuser under strong part-load conditions. Science China Technological Sciences, 58(3):405-414.

[196]Zhou L, Shi WD, Li W, et al., 2016. Particle image velocimetry measurements and performance experiments in a compact return diffuser under different rotating speed. Experimental Techniques, 40(1):245-252.

[197]Zhu JJ, Zhang HQ, 2018. A review of experiments and modeling of gas-liquid flow in electrical submersible pumps. Energies, 11(1):180.

[198]Zhu YS, Zhu SS, Zhu DZ, et al., 2012. Predicting performance of centrifugal pump by combining genetic algorithm with BP neural network. Mechanical Science and Technology, 31(8):1274-1279 (in Chinese).

[199]Zouari R, Sieg-Zieba S, Sidahmed M, 2004. Fault detection system for centrifugal pumps using neural networks and neuro-fuzzy techniques. Surveillance, 5:11-13.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE